Membrane Switch Connector Options
The connector is the link between your membrane switch and the electronics inside your product. Choosing the right connection helps simplify assembly and supports reliable performance throughout the life of the device.
CSI Keyboards offers a variety of connection options, from flexible tails that plug directly into a printed circuit board to crimped connectors and soldered connections. The best choice depends on your circuit design, available space, assembly process, and operating environment.
Common Connector Options
Bare Tail for a ZIF Connector
A bare flexible tail can be designed to plug into a zero insertion force (ZIF) connector mounted on the customer’s PCB. This creates a compact, low-profile connection without a separate connector housing on the tail.
Female Standard Connector
A female connector is attached to the flexible tail and mates with a compatible male header on the PCB. Standard options include 0.100-inch center-to-center spacing and headers with 0.025-inch square posts.
Female Latching Connector
A female latching connector mates with a compatible latching header. The latch helps retain the connection and can be useful when the assembly may be exposed to movement or vibration.
Additional Connection Options
Depending on your application, other options may include:
- Male standard connectors, which mate with compatible female headers.
- Male latching connectors, which mate with compatible latching headers.
- Solder tabs, which can connect to a PCB or wires.
- Discrete wires, which provide another way to connect the switch to the product’s electronics.
Connector spacing, contact configuration, and compatibility should be confirmed for each design.
Crimpflex and Memcon Connectors
Crimped contacts can be supplied in male, female, or solder-tab configurations, with a selection of housings to suit the mating connection. Options with 0.100-inch spacing are available.
The right housing and retention method depend on the assembly requirements and the conditions the finished product will experience, including shock and vibration.
ZIF Connectors
ZIF connectors are mounted on the PCB and accept the bare end of a flexible circuit tail. The tail is inserted into the connector and held in place by its locking mechanism.
These connectors are lightweight and low profile, making them a useful option when space is limited. A stiffener can be added to the end of the tail to help support the connection.
ZIF connectors are available in a range of contact counts and pitches. The tail’s pitch, thickness, contact orientation, and stiffener must be compatible with the selected connector.
Hot-Bar Soldered Tails
For a PCB-based keypad, a copper flex tail can be hot-bar soldered directly to the keypad’s PCB. The other end of the tail can then be designed to connect to the customer’s electronics, such as through a compatible ZIF connector.
This approach provides flexibility in routing the connection between the keypad assembly and the main circuit board.
Male, Female, and Solder-Tab Connections
Crimped contacts can be supplied in male, female, or solder-tab configurations, with a selection of housings to suit the mating connection. Options with 0.100-inch spacing are available.
The right housing and retention method depend on the assembly requirements and the conditions the finished product will experience, including shock and vibration.
Choosing the Right Connector
When selecting a connection, consider:
- The type and number of contacts required
- Available space and connector profile
- Tail length, routing, and circuit material
- The mating connector or header on the PCB
- Assembly and service requirements
- Expected movement, shock, vibration, and environmental conditions
Need Help Selecting a Connector?
CSI Keyboards can help you choose a connection that fits your membrane switch design and integrates with your product.